Boot Option Files
7210 SAS M, T, X, R6 Basic System Configuration Guide Page 189
    uplinkA-vlan       0
    uplinkA-route      10.135.0.0/16 next-hop 192.168.1.1
#uplinkB Port Settings:
    uplinkB-port       1/1/2
    uplinkB-address    0 
    uplinkB-vlan       0
#System Settings:
    wait      3
    persist       on
    console-speed      115200
    no console-disabled
===============================================================================
*A:ALA#
*A:ALA# show bof booted 
===============================================================================
System booted with BOF
===============================================================================
    primary-image      ftp://*:*@10.135.16.90/./images/auto-boot/solution/bothx.tim
    secondary-image    ftp://*:*@10.135.16.90/./images/auto-boot/solution/bothx.tim
    tertiary-image     ftp://*:*@10.135.16.90/./images/auto-boot/solution/both.tim
    primary-dns        135.254.244.204
    dns-domain    in.lucent.com
    ping-address   10.135.16.90
#uplinkA Port Settings:
    uplinkA-port       1/1/1
    uplinkA-address    192.168.1.11/24 
    uplinkA-vlan       0
    uplinkA-route      10.135.0.0/16 next-hop 192.168.1.1
#uplinkB Port Settings:
    uplinkB-port       1/1/2
    uplinkB-address    0 
    uplinkB-vlan       0
#System Settings:
    wait      3
    persist       on
    console-speed      115200
    no console-disabled
===============================================================================
*A:ALA#
A:7210-SAS>show# bof
===============================================================================
BOF (Memory)
===============================================================================
    primary-image      ftp://*:*@135.254.170.29//import/panos_builds/nightly/0.0/
I943/MTU-sultan/
    primary-config     tftp://10.135.25.100/MTU/mtu4-Ver2-0-SFPgash.cfg
    secondary-config   tftp://10.135.25.100/MTU/mtu4-ver-5-SAP.cfg
#eth-mgmt Port Settings:
    no  eth-mgmt-disabled
    eth-mgmt-address   10.135.25.98/24
    eth-mgmt-route     10.135.0.0/16 next-hop 10.135.25.1
    eth-mgmt-route     135.0.0.0/8 next-hop 10.135.25.1
    eth-mgmt-route     135.254.0.0/16 next-hop 10.135.25.1
    eth-mgmt-autoneg
    eth-mgmt-duplex    full
    eth-mgmt-speed     100
#uplinkA Port Settings:
    uplinkA-port       1/1/24
    uplinkA-address    10.135.25.98/24