Common Configuration Tasks
Page 266 7210 SAS M, T, X, R6 Basic System Configuration Guide
NTP
Network Time Protocol (NTP) is defined in RFC 1305, Network Time Protocol (Version 3)
Specification, Implementation and Analysis. It allows for participating network nodes to keep time
more accurately and maintain time in a synchronized manner between all participating network
nodes.
NTP time elements include:
• Authentication-check on page 266
• Authentication-key on page 267
• Broadcast on page 267
• Broadcastclient on page 268
• NTP-Server on page 269
• Peer on page 269
• Server on page 270
Authentication-check
The authentication-check command provides for the option to skip the rejection of NTP PDUs that
do not match the authentication key or authentication type requirements. The default behavior
when authentication is configured is to reject all NTP protocol PDUs that have a mismatch in
either the authentication key-id, type, or key.
When authentication-check is configured, NTP PDUs are authenticated on receipt. However,
mismatches cause a counter to be increased, one counter for key-id, one for type, and one for key
value mismatches.
CLI Syntax: config>system>time>ntp
authentication-check
Example
:
config>system>time>ntp#
config>system>time>ntp# authentication-check
config>system>time>ntp# no shutdown
To Next Page
Loading...
