Alcatel-Lucent 7210 SAS M - Page 315

System Management
7210 SAS M, T, X, R6 Basic System Configuration Guide Page 315
System Alarm Contact Commands
config
— system
— alarm-contact-in-power {on|off}
— alarm-contact-input alarm-contact-input-id
— [no] alarm-output-severity [critical | major| none] (for 7210 SAS-M only)
— [no] alarm-output-severity [critical | major | minor | none] (for SAS X and 7210 SAS-
T only)
— [no] clear-alarm-msg {alarm-msg-txt}
— description description-string
— normal-state [open | closed]
— [no] shutdown
— [no] trigger-alarm-msg {alarm-msg-txt}