Alcatel-Lucent 7210 SAS M Configuration Guide

System Commands
Page 462 7210 SAS M, T, X, R6 Basic System Configuration Guide
NTP Status
===============================================================================
Enabled : Yes Stratum : 3
Admin Status : up Oper Status : up
Server enabled : No Server keyId : none
System Ref Id : 192.168.15.221 Auth Check : Yes
===============================================================================
NTP Active Associations
===============================================================================
State Remote Reference ID St Type Auth Poll R Offset
-------------------------------------------------------------------------------
reject 192.168.15.221 192.168.14.50 2 srvr none 64 y 0.901
chosen 192.168.15.221 192.168.14.50 2 mclnt none 64 y 1.101
===============================================================================
A:pc-40>config>system>time>ntp#
oper-group
Syntax oper-group [group-name]
oper-group group-name [detail]
oper-group group-name [monitoring]
Context show>system
Description This command displays the oper-group information, member count, monitor-client count, and status
in a single line for each of the configured oper-groups.
Output Show oper-group Output — The following table describes oper-group output fields.
Show Output
*A:7210SAS>show>system# oper-group
Label Description
Name
Displays the name of the oper-group.
Oper Status
The operational status of the oper-group.
Creation Origin
Displays if it was created manually.
Hold Up Time
The configured HOLD UP time.
Hold Dn Time
The configured HOLD down time.
Members
Displays the number of members of the oper-group.
Monitor
Displays the number of monitoring clients.

Alcatel-Lucent 7210 SAS M Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS M
Category	Switch
Language	English