Alcatel-Lucent 7210 SAS M Configuration Guide

System Commands
Page 466 7210 SAS M, T, X, R6 Basic System Configuration Guide
Sample Output for 7210 SAS-M
*A:7210>show>system# resource-profile
A:SAS-MX>show>system# resource-profile
===============================================================================
Active System Resource Profile Information
===============================================================================
-------------------------------------------------------------------------------
IPv6 FIB
-------------------------------------------------------------------------------
max-ipv6-routes : disable
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Router
-------------------------------------------------------------------------------
system-max-ecmp : 1
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Ingress Internal CAM
-------------------------------------------------------------------------------
Sap Ingress Qos resource : 5 Sap Aggregate Meter : 1
-------------------------------------------------------------------------------
IPv4 Resource : max Mac Resource : max
IPv4-IPv6 Resource : disable
-------------------------------------------------------------------------------
Sap Ingress ACL resource : 5
-------------------------------------------------------------------------------
IPv4 Resource : max Mac Resource : max
IPv4-IPv6 128 bit Resource : disable IPv6 64 bit Resource : disable
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Eth CFM : disable
-------------------------------------------------------------------------------
up-mep : disable G8032-fast-flood : disable
IPv6 FIB
Displays the amount of IPv6 FIB size configured for use by IPv6
routing.
G8032-fast-flood
Displays the resources configured for use by G8032 fast-flood
feature.
Disable – No resources are allocated for use by this feature.
Decommissioned
Ports
The list of ports which have been decommissioned by the user.
Services cannot be configured on these ports.
MBS pool
Displays the value configured for mbs-pool. It is available only
on 7210 SAS-T.
Table 33: Show system resource-profile output fields.
Label Description

Alcatel-Lucent 7210 SAS M Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS M
Category	Switch
Language	English