Alcatel-Lucent 7210 SAS M Configuration Guide

System Commands
Page 508 7210 SAS M, T, X, R6 Basic System Configuration Guide
Context clear>system
Description This command allows an operator to individually clear (re-enable) a previously failed reference. As
long as the reference is one of the valid options, this command is always executed. An inherent
behavior enables the revertive mode which causes a re-evaluation of all available references.
Parameters ref1 — clears the first timing reference
ref2 — clears the second timing reference
trace
Syntax trace log
Context clear
Description This command allows an operator to clear the trace log.

Alcatel-Lucent 7210 SAS M Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS M
Category	Switch
Language	English