Alcatel-Lucent 7705 - Installing the Chassis in a Rack; Rack-Mounting the Chassis

IP Router Command Reference
82 7705 SAR OS Router Configuration Guide
Router Interface Commands
config
—router [router-name]
— [no] interface ip-int-name
— address {ip-address/mask | ip-address netmask | dhcp} [client-identifier [ascii-value
| interface-name]] [vendor-class-id vendor-class-id]
—no address
— [no] allow-directed-broadcasts
— arp-retry-timer ms-timer
—no arp-retry-timer
— arp-timeout seconds
—no arp-timeout
— bfd transmit-interval [receive receive-interval] [multiplier multiplier] [type np]
—no bfd
— description description-string
—no description
— dhcp
— description description-string
—no description
— gi-address ip-address [src-ip-addr]
—no gi-address
— [no] option
— action {replace | drop | keep}
—no action
— circuit-id [ascii-tuple | port-id | if-name]
—no circuit-id
— [no] copy-82
— remote-id [mac | string string]
—no remote-id
— server server1 [server2...(up to 8 max)]
—no server
— [no] shutdown
— egress
— agg-rate-limit agg-rate [cir cir-rate]
—no agg-rate-limit
— filter ip ip-filter-id
— filter ipv6 ipv6-filter-id
—no filter [ip ip-filter-id | ipv6 ipv6-filter-id]
— queue-policy
name
—no queue-policy
— eth-cfm
—mep mep-id domain md-index association ma-index
—no mep mep-id domain md-index association ma-index
— [no] ccm-enable
— ccm-ltm-priority priority
— no ccm-ltm-priority
— [no] dual-ended-loss-test-enable
— alarm-threshold percentage
— no alarm-threshold
— alarm-clear-threshold percentage
— no alarm-clear-threshold
— [no] eth-test-enable