Programming your telephone
8AL91432ENAD ed01.1 71/94
• VPN Pincode
→
Request Pincode on Boot: if this option is activated, the PIN code is required
when you boot your desk phone. We recommend you activate this option.
Validate.
• The VPN configuration is saved and the main menu is displayed.
• Select this icon to exit the configuration menu. The desk phone restarts.
• Enter the PIN code if you have selected the option (Request Pincode on Boot).
• Validate.
• Your desk phone is ready for remote working.
Select this icon to save parameters
Select this icon to return to the main menu.
If you leave the PIN code request menu when the phone is starting, the phone will start without VPN
activated.
If an error occurs when your phone is running in remote mode, a popup is displayed with an error
message. Please note this message to send to your administrator (see chapter: Contacting your
administrator).
3.22.3 Change the configuration
You have to change a parameter of the VPN configuration.
• Access to the administration menu of the desk phone (see chapter below).
• Remote Config
• VPN (scroll down the menu).
• Select a submenu to change the configuration (VPN Config, VPN Servers, VPN Authent, VPN
Pincode).
• Enter your PIN code (If an administrator password is defined by the system, you can use it to
access to the VPN configuration by selecting: Use Password).
• Validate.
• Change parameters.
• Select this icon to save parameters.
• The VPN configuration is saved and the main menu is displayed.
• Select this icon to exit the configuration menu. The desk phone restarts.
• Enter the PIN code if you have selected the option (Request Pincode on Boot).
• Validate.
• Your desk phone is ready for remote working.
If an error occurs when your phone is running in remote mode, a popup is displayed with an error
message. Please note this message to send to your administrator.
To Next Page
Loading...
