Programming your telephone
8AL91432ENAD ed01.1 72/94
3.22.4 PIN code
The PIN code is composed of 4 digits. You can access the VPN configuration by entering the PIN code
or the administrator password if defined by the system. Depending on the VPN configuration, the
PIN code is requested when you boot your desk phone. We recommend you enable this option for
security reasons and if you need your phone in remote and in business place (See Reconnect your
desk phone in your business place).
If the PIN code is incorrect 5 times in succession, the PIN code and VPN parameters will be erased.
If no administrator password is defined by the system, the PIN code is required to access VPN
configuration.
Once the PIN code and the administrator password have been set, you can switch between the PIN
code and the administrator password by selecting the following softkeys in the login window: User
password, Use PIN code.
3.22.5 Reset your PIN code
• Access to the administration menu of the desk phone (see chapter below).
• Remote Config
• VPN (scroll down the menu).
• VPN Pincode
• Enter your PIN code.
• Validate.
• Set new Pincode: enter the new PIN Code.
• Select this icon to save parameters.
• The VPN configuration is saved and the main menu is displayed.
• Select this icon to exit the configuration menu. The desk phone restarts.
• Enter the PIN code if you have selected the option (Request Pincode on Boot).
3.22.6 Reconnect your desk phone in your business place
Your phone is already configured for remote working.
If you connect your desk phone to the digital network:
If your desk phone is already declared on digital network, you just have to connect and start it
(your desk phone is declared twice: on IP network for remote and digital network).
If you connect your phone to the IP network:
• Connect your desk phone to the network (and plug in the power jack if you are using an
external power adapter).
• If the option to enter PIN code when you boot your desk phone is enabled in the VPN
configuration (Request Pincode on Boot):
o The PIN code is requested.
o Select this icon to go back.
o The phone restarts in normal mode. The VPN is temporary disabled until the next
reboot.
To Next Page
Loading...
