EasyManuals Logo

Allied Telesis AT-8000S Series Cli Reference Guide

Allied Telesis AT-8000S Series
334 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #242 background imageLoading...
Page #242 background image
Page 230
Not approved by Document Control. For review only.
Allied Telesis
Command Line Interface Users Guide
Command Mode
Global Configuration mode
User Guidelines
RSA keys are generated in pairs: one public RSA key and one private RSA key. If the device already has RSA
keys, a warning and prompt to replace the existing keys with new keys are displayed.
This command is not saved in the device configuration; however, the keys generated by this command are saved
in the private configuration which is never displayed to the user or backed up on another device.
RSA keys are saved to the backup master.
This command may take a considerable period of time to execute.
Example
The following example generates RSA key pairs.
ip ssh pubkey-auth
The ip ssh pubkey-auth Global Configuration mode command enables public key authentication for incoming
SSH sessions. Use the no form of this command to disable this function.
Syntax
ip ssh pubkey-auth
no ip ssh pubkey-auth
Default Configuration
Public Key authentication for incoming SSH sessions is disabled.
Command Mode
Global Configuration mode
User Guidelines
AAA authentication is independent
Example
The following example enables public key authentication for incoming SSH sessions.
crypto key pubkey-chain ssh
The crypto key pubkey-chain ssh Global Configuration mode command enters the SSH Public Key-chain
Configuration mode. The mode is used to manually specify other device public keys such as SSH client public
keys.
Console(config)# crypto key generate rsa
Console(config)# ip ssh pubkey-auth

Table of Contents

Other manuals for Allied Telesis AT-8000S Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Allied Telesis AT-8000S Series and is the answer not in the manual?

Allied Telesis AT-8000S Series Specifications

General IconGeneral
Operating Temperature0°C to 40°C (32°F to 104°F)
Storage Humidity5% to 95% non-condensing
Switching Capacity104 Gbps
Forwarding Rate77.4 Mpps
VLANs4, 094
Layer 3 FeaturesStatic routing, RIP v1/v2
ManagementWeb-based
Operating Humidity10% to 90% non-condensing

Related product manuals