Allied Telesis AT-8000S Series - Show Snmp Views; Show Snmp Groups

SNMP Commands
Page 197
show snmp views
The show snmp views Privileged EXEC mode command displays the configuration of views.
Syntax
show snmp views [viewname]
Parameters
•
viewname — Specifies the name of the view. (Range: 1-30)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the configuration of views.
show snmp groups
The show snmp groups Privileged EXEC mode command displays the configuration of groups.
Syntax
show snmp groups [groupname]
Parameters
•
groupname—Specifies the name of the group. (Range: 1-30)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
Console# show snmp views
Name OID Tree Type
----------- ----------------------- ---------
user-view 1.3.6.1.2.1.1 Included
user-view 1.3.6.1.2.1.1.7 Excluded
user-view 1.3.6.1.2.1.2.2.1.*.1 Included