Allied Telesis AT-8000S Series Cli Reference Guide

Ethernet Configuration Commands
Page 91
show interfaces description
The show interfaces description Privileged EXEC mode command displays the description for all configured
interfaces.
Syntax
show interfaces description [ethernet interface | port-channel port-channel-number]
Parameters
•
interface — Valid Ethernet port. (Full syntax: unit/port)
• port-channel-number — A valid port-channel number.
Default Configuration
This command has no default configuration.
Command Modes
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays descriptions of configured interfaces.
e15 100M-Copper -- -- -- -- Down -- --
e16 100M-Copper -- -- -- -- Down -- --
e17 100M-Copper -- -- -- -- Down -- --
e18 100M-Copper -- -- -- -- Down -- --
e19 100M-Copper -- -- -- -- Down -- --
Console#
show interfaces description
Port Description
---- -----------
1/e1 lab
1/e2
1/e3
1/e4
1/e5
1/e6
ch1
ch2

Allied Telesis AT-8000S Series Specifications

General

Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Humidity	5% to 95% non-condensing
Switching Capacity	104 Gbps
Forwarding Rate	77.4 Mpps
VLANs	4, 094
Layer 3 Features	Static routing, RIP v1/v2
Management	Web-based
Operating Humidity	10% to 90% non-condensing