130
NEO 1 and NEO 2
User Manual
TROUBLESHOOTING
Reinstalling or Repairing Keys on the NEO Keyboard
. . . . .
2. Hold the spacebar with the thumb and index finger of each hand as
shown below. Make sure the wire “ears” are extended toward the bottom
of the spacebar.
3. Holding the spacebar above and slightly in front of its intended location,
insert the wire “ears” into the square tabs on the keyboard as shown
below. Hook each wire “ear” into the square tabs on the keypad, one at
each end. Slide the wire ears from the front of the tabs to the back. Hold
the wire there with your thumbs as you fold the spacebar forward and
snap it into place.
To Next Page
Loading...
