22
NEO 1 and NEO 2
User Manual
G ETTING STARTED
Setting Up a Renaissance Receiver for NEO 2
. . . . .
How to Connect a Renaissance Receiver to Your Computer
Follow these steps to connect a Renaissance Receiver to your computer:
1. Find the Renaissance Receiver and the USB data cable.
2. Plug the end of the data cable that
is nearly square into the connector
on the back of the Receiver
A.
3. Connect the USB connector on the
data cable B to the matching USB port
on your computer.
How to Name the Receiver
It’s important to set a name for the computer/Receiver combination so that
students know they’re connecting to the right Receiver when they use NEO 2
for assignments. This is especially important if your school has more than one
Renaissance Receiver. Follow these steps:
1. Start the Renaissance Wireless Server Utility:
• Windows computers: Right-click in the lower-right corner of your
computer screen (the system tray) and choose Manage from the
menu that appears. If you don’t see this icon in your system tray, click
Start Programs Renaissance Wireless Server
Renaissance Wireless Server Utility.
• Macintosh computers: In your computer’s Applications folder, open
the Renaissance Wireless Server folder. Then, double-click
Renaissance Wireless Server Utility.
A
A
B
To Next Page
Loading...
