68
NEO 1 and NEO 2
User Manual
NEO SETTINGS
Changing Settings in the Control Panel
. . . . .
Change Default AlphaWord Font
This setting allows you to choose the font size you want to use for AlphaWord
Plus files. For more information, see page 31.
Turn Calculator Off
To turn NEO’s Calculator SmartApplet off, move the cursor next to this
setting and press enter. Then, enter the master password (see page 115) and
press enter.
There are other ways to turn the Calculator off on NEOs or to turn it back on:
•In AlphaWord Plus, press ctrl-a-C. Enter the master password (see
page 115).
•Press applets to see the SmartApplet menu. Move the cursor next to
Calculator and press ctrl-a-L. Enter the master password (see page 115).
The symbol appears next to Calculator in the list to show it has been
disabled.
• In AlphaSmart Manager, click the Settings tab, click Calculator on the
left, check the Disable this SmartApplet box on the right, and click Yes
or No. Then, send the changes to your NEOs from the Send List tab.
Two-Button On Option
Normally, NEO turns on when you press the on/off button. If your NEO
often gets turned on accidentally, perhaps because the button is pressed when
you carry the NEO in a bag or backpack, you can enable the two-button on
option to require you to press on/off and enter together to turn NEO on.
After you select this Control Panel setting, press enter to enable it (if it was
disabled) or disable it (if it was enabled).
Reset all file
passwords
When file passwords are ON or
enabled, this setting changes all file
passwords back to the default
password (write). Simply highlight
the setting and press enter. You’ll
be asked to enter the master
password (see page 115).
• In AlphaSmart Manager, click
the Settings tab, select
AlphaWord Plus on the left,
check the File Passwords box,
and enter the password that you
want to use for all files. Then,
send the changes to NEOs from
the Send List tab.
Setting Name What It Does Other Ways to Change This
To Next Page
Loading...
