Chapter 4 — Advanced Operations 93
NOTE: Use only Sony DGD150P (20.0 GB), DGD125P (12.0
GB) or DGD120P (4.0 GB) tapes for the best tape drive
performance.
NOTE: Tapes created on this unit can only be restored on units
with the Intellex v2.0 or later software. However, this
unit can restore tapes created on units with any version
of the Intellex software.
The Image Database Backup screens guide you step-by-step
through the backup process.
NOTE: Backing up the image database is a protected feature.
You must possess the Archive Enable privilege to
access it (see
Security Setup
in the
Intellex Installa-
tion Instructions
).
To back up the image database:
1. From the main screen, click the Archive button. The
Archive Options screen appears (see Archive Operation).
Restore images from tape — Click to copy images from a
backup tape to the system (see Restore Images). Once restored,
these images can be reviewed. During background archiving,
this option is disabled.
Play restored images — Click to review images that were
copied from a backup tape to the system (see Play Restored
Images).
Format tape — Click to format an archive tape (see Format
Tape). During background archiving, this option is disabled.
Recover data from tape — Click to recover data from a tape
(see Recover Data From Tape). During background archiving,
this option is disabled.
Close — Click to close the Archive Options screen and return
to the main screen.
Help — Click to display online help for this screen.
Back Up the Image Database
To Next Page
Loading...
Need help?
General
