Chapter 4 — Advanced Operations 101
Select this option to stop recording and back up the image data-
base immediately. This is called foreground archiving because
the unit interrupts normal operation and will not record any im-
ages during the backup process. It archives in the “foreground.”
To archive in the foreground:
1. Insert a backup tape. (Refer to Appendix C — Technical
Specifications in the Intellex Installation Instructions for tape
specifications.)
2. After the tape drive lights stop blinking, click Next. The
unit checks the tape. If a tape problem occurs, the unit dis-
plays a message. Refer to the Intellex Troubleshooting Guide
to identify the appropriate action.
Each message screen provides one or more options in ad-
dition to the following two buttons:
Cancel — Click to cancel the archive and return to the
main screen.
Help — Click to display online help for the screen.
Foreground Archiving
5. Remove the tape and label it as indicated on this screen.
6. Click Finish to return to the main screen.