126 Intellex
®
Operating Instructions
Select one of the following options and click OK:
Halt when database is full. — Select this option to halt image
recording when the image database is full.
You must click the Begin Record button on the Utility Options
screen to start recording again (see Utility Options).
Notify me again when 90% full. — This option is disabled
when the image database is at least 90% full.
Database 90% Full
When the percentage of unarchived images in the image data-
base reaches 90%, the unit flashes the Alarms indicator on the
front panel. It also energizes alarm output 16 if the Message
Alert option is selected (see Alarm Setup in the Intellex Installa-
tion Instructions). Then it displays the following screen.
NOTE: This screen only appears when Linear is selected on
the Record Mode screen.
Continue at beginning when full. — Select this option to con-
tinue recording images from the beginning of the image data-
base. When the database becomes full, the unit behaves as if
circular mode is selected, recording over the oldest images.
Help — Click to display online help for the screen.
To Next Page
Loading...
Need help?
General
