120 Intellex
®
Operating Instructions
Log Out
Use this option to inform the system that you are transferring
control to a different user. The unit blocks all access until a
new user logs in. Normal processing continues whether or not
a user is logged in.
NOTE: This option is only available if system security is en-
abled (see
Security Setup
in the
Intellex Installation
Instructions
).
To log out of the system:
1. From the main screen, click the Utility button. The Utility
Options screen appears (see Utility Options).
2. Click Log Out. A confirmation message appears.
Use this option to clear alarm messages from the live display.
It does not clear the actual alarm.
This option is only available when the Latch Messages op-
tion is selected in the Alarms portion of the Setup Options
screen and when one or more alarm messages appear on the
live display.
NOTE: Clearing latched messages is a protected feature. You
must possess the Clear Latched Messages privilege
to access it (see
Security Setup
in the
Intellex Installa-
tion Instructions
).
To clear latched messages:
1. From the main screen, click the Utility button. The Utility
Options screen appears (see Utility Options).
2. Click the Clear Latched button. A confirmation screen will
appear.
3. Select one of the following options:
No — Click to cancel this operation and return to the Util-
ity Options screen.
Yes — Click to clear all latched alarms and return to the
Utility Options screen.
Clear Latched
To Next Page
Loading...
Need help?
General
