116 Intellex
®
Operating Instructions
Clear Latched — Use this option to manually clear alarm
messages from the live display (see Clear Latched).
Log Out — Use this option to inform the system that you are
transferring control to a different user (see Log Out).
Shutdown — Use this option to shut down the system (see
Shutdown).
Exit — Use this option to exit from the Intellex system and
gain access to the unit’s operating system (see Exit to System).
About Intellex — Use this option to display system revision
and copyright information (see About Intellex).
Close — Click to close the Utility Options screen and return to
the main screen.
Help — Click to display online help for the screen.
Begin Record
When the image database fills completely with unarchived
images, recording stops and the unit displays a message. Use
this option to start recording again at the beginning of the im-
age database.
This option is only available when:
• The system is configured for linear mode operation (see
Record Mode Setup in the Intellex Installation Instructions),
and
• The Begin recording later option was selected from the
full database notification screen.
NOTE: The Begin Record option is a protected feature. You must
possess the Record Enable privilege to access it (see
Security Setup
in the
Intellex Installation Instructions
).
To begin recording again:
1. From the main screen, click the Utility button. The Utility
Options screen appears (see Utility Options).
2. Click Begin Record.
To Next Page
Loading...
