16 Intellex
®
Operating Instructions
2. Press the numeric keys on the keypad to enter the code.
3. Press the Backspace key to erase an entry.
4. Press the Enter or Return key to log in.
The system verifies the code.
If the code is invalid, the system displays an error message.
Click OK to try again.
If the code is valid, the system accesses the security privileges
associated with the code. If the Utility Options screen appears,
click Close. The main screen appears.
NOTE: This option is only available if system security is en-
abled (see
Security Setup
in the
Intellex Installation
Instructions
).
When another person takes control of the unit, the previous
operator must log out and the new operator must log in.
1. Click Utility on the main screen. The Utility Options screen
appears.
2. Click Log Out. A confirmation message appears.
3. Select one of the following options:
No — Click to close this screen without logging out.
Yes — Click to log out. The Enter PIN Code screen ap-
pears and the unit prevents any access until another user
logs in.
4. Log in the new user (see Logging In above).
Changing Users
To Next Page
Loading...
