106 Intellex
®
Operating Instructions
When this happens, the archive information on the tape is not
complete and must be recovered. Otherwise, the data cannot
be restored.
If the tape is still in the tape drive, the unit displays a message
and recovers the tape data automatically. Then it continues
the archive operation.
If the tape drive is empty, the Intellex unit asks you to insert a
tape. If you insert the correct tape, the unit displays a message
and recovers the tape data automatically. Then it continues
the archive operation.
If the wrong tape is in the tape drive, the unit displays the
following screen:
To Next Page
Loading...
