4 Intellex
®
Operating Instructions
• On-screen menus simplify system setup and operation.
• Online help information is available from every screen.
• One alarm input and one alarm output are available for
each camera (eight pairs on eight camera units, 16 pairs
on 16 camera units). The polarity for each alarm input can
be set to either active high or active low.
• A security system provides password protection to restrict
access to various operation and configuration functions.
• On-screen display includes date, time, alarm status, video
loss and 10-character camera titles.
• Hard disk storage protects all system configuration infor-
mation against power loss.
• Unit storage capacity can be increased by installing an
optional external data storage unit.
• An optional dome controller (Sensormatic VM16 or Ameri-
can Dynamics ADTT16) can be used to select cameras,
change display format to 1x1, 2x2, 3x3 or 4x4 and to se-
quence cameras (live mode only).
• One or more Intellex units can be connected over a local
area network (LAN). The Network Client software must be
installed on your computer.
To Next Page
Loading...
Need help?
General
