28 Intellex
®
Operating Instructions
Quality — Lists the current record quality setting (Super Reso-
lution, Normal or Extended Record) for each camera. Quality
settings are configured in the Schedule portion of the Setup
Options screen.
Sensitivity — Lists the current sensitivity setting (High or Nor-
mal) for each camera. Sensitivity settings are configured in the
Schedule portion of the Setup Options screen.
Mode — Lists the current operating mode for each camera
(Active, Alarmed, Disabled or Stopped). Schedule mode set-
tings are configured in the Schedule portion of the Setup
Options screen.
Pre-Alarm — Lists the pre-alarm setting (blank for zero, 15,
30, 45 or 60 seconds) for each camera in Alarmed mode. Pre-
alarm settings are configured in the Schedule portion of the
Setup Options screen.
Filter — Lists the current filter, which is configured for each
camera in Active or Alarmed mode. Filter settings are config-
ured in the Schedule portion of the Setup Options screen.
Record Mode — Displays the current record mode (Circular
or Linear), which is configured in the Record Mode portion of
the Setup Options screen.
Time Span — Displays the amount of time between the old-
est and newest image in the image database, in days, hours
and minutes.
Total Images — Displays the total number of images stored
in the image database.
Remaining Images — Displays an estimate of unit recording
capacity, based on available space, number of images recorded,
and type and size of the images in the image database. (The
unit only displays this information when Linear is selected in
the Record Mode portion of the Setup Options screen.)
Record Rate — Displays the current system record rate, which
is configured in the Schedule portion of the Setup Options
screen.