PN 903-8797, Rev A
Special Warnings and Information
Equipment Used in Hazardous Locations
See Chapter 5 – Specications for details about the suitability of this equipment in haz-
ardous locations. This analyzer must not be commissioned until a person trained in the
area of evaluating equipment for use in hazardous classied locations has conrmed
that this equipment and its installation are in compliance with the requirements for
the area.
Explosion Hazard – Do Not Disconnect Equipment Unless Power Has Been
Switched O or the Area is Known to be Non-Hazardous.
Risque d’explosion – Avant de déconnecter l’équipement, coupez le courant où
vous assurez que l’emplacement est designé non dangereux.
All input and output wiring must be in accordance with wiring methods authorized
for the area classication by the authority having jurisdiction. Ex d glands or stopping
boxes (seals) must be installed on ameproof enclosures.
xii | 241CE II Hydrocarbon Dewpoint Analyzer
To Next Page
Loading...
Need help?
General
