PN 903-8797, Rev A
Spare Parts Lists
This section lists the recommended spare parts to have readily available for the
241CE II Analyzer to ensure the analyzer and its sample system operate at peak
eciency.
Figure No.” in the Spare Parts Lists refers to Figure numbers in this
manual that show the location of the part.
All individual parts or kits are quantity (QTY) one (1) unless noted
otherwise.
241CE II Analyzer (120 / 240 VAC) Spare Parts
Description
AMETEK
Part No.
Chapter/
Figure No.
Peltier Cooler Assembly Repair Kit
Kit includes:
- Peltier Cooler Assembly (100-1578)
- Thermalcote II, 1 Tube (301-1078)
100-2605
(See Note
‡
)
4-1
O-Ring, EPR-218 (Measuring Cell) 300-4511 4-1
Filterblock Assembly Rebuild Kit (See Note *) 100-1848 4-2
Flow Restrictor, 50 cc/minute (Filterblock Assembly) 300-6245 4-2
Flame Arrestor, 250 cc/minute (Filterblock Assembly) 300-4512 —
* See “Filterblock Maintenance” in this chapter for indications that the
Filterblock Assembly requires cleaning. When cleaning the Filterblock,
carefully examine the Membrane Filters, o-rings, and Flow Restric-
tors to determine if they damaged or contaminated. If so, replace the
parts.
‡
This Kit is required for maintenance on the Peltier Cooler Assembly,
which is discussed in a separate document entitled “241CE II Analyzer
Peltier Cooler Assembly Replacement Manual Supplement.” To order
these Kit parts individually, use the corresponding spare part number.
4-4 | 241CE II Hydrocarbon Dewpoint Analyzer
To Next Page
Loading...
Need help?
General
