PN 903-8797, Rev A
Pre-Installation Requirements
Storage Prior to Installation
If the analyzer is stored for any period of time prior to installation, store the
equipment in an environment where it is not subject to dripping or splashing
liquids, corrosive gases, high humidity, or excessive heat or cold. Recommend-
ed storage conditions include:
Temperature: -20 °C–60 °C (-4 °F–140 °F)
Relative Humidity: maximum 95 %, non-condensing
Failure to comply with these storage conditions will void your warranty.
2-2 | 241CE II Hydrocarbon Dewpoint Analyzer
To Next Page
Loading...
Need help?
General
