PN 903-8797, Rev A
Working in This Manual
While working in this manual, icons in the outside page margins represent var-
ious kinds of information that serve as reminders or extra information about
the topic, or navigation information when working from the User Interface.
Descriptions of User Interface menus, terms, characters, parameters, and com-
mands can be found in Chapter3.
Reminder icon:
These reminders indicate related information about the topic, certain actions that
are necessary before continuing with the current procedure, or information that is
recommended by AMETEK.
User Interface Navigation icon:
While working from the User Interface, use these navigational aids to quickly access
different screens. In this example, the system navigates to the Fast Cooling Rate
(FRate) screen, where you can change the Fast-per-minute cooling rate temperature
that will be used to cool the mirror during the Cooling Stage of the analyzer measuring
cycle. See “Navigating From the User Interface” in Chapter 3.
Supplemental Information – Where Can I Find It?
Some analyzers are congured with optional equipment, that may require
supplementary information. The analyzer manual and this additional infor-
mation (Manual Supplements) is included in the Documentation Package
folder shipped with the analyzer.
Example:
See also “Troubleshooting and
Diagnostics” in Chapter 4.
Example:
RUN ModeApplicCFG
FRate
Overview | 1-9
To Next Page
Loading...
Need help?
General
