Anritsu MF2412B - Page 121

Section 5 GPIB
5-18
3) LMTL lower limit
Sets the lower frequency limit for the template function.
Command : LMTL n
Query : LMTL ?
Response : LMTL n
<Program data>
Value of n
0 to Fmax (Hz) ........................... Suffixes : GHZ, MHZ, KHZ, HZ, G, MA, K (Unit Hz)
Note : Fmax= 20 GHZ ............. MF2412B
27 GHZ ............. MF2413B
40 GHZ ............. MF2414B
4) LMTU upper limit
Sets the upper frequency limit for the template function.
Command : LMTU n
Query : LMTU?
Response : LMTU n
<Program data>
Value of n
0 to Fmax (Hz) ........................... Suffixes : GHZ, MHZ, KHZ, HZ, G, MA, K (Unit Hz)
Note : Fmax= 20 GHZ ............. MF2412B
27 GHZ ............. MF2413B
40 GHZ ............. MF2414B
(9) M
1) MBCF measurement data (burst carrier frequency)
Outputs a burst carrier frequency when there is one measurement result read function during burst measurement.
Query : MBCF?
Response : n
<Response data>
Value of n ........... Output in frequency (HZ) units.
During CW measurement (when burst is Off), 0 HZ is returned.