Anritsu MF2412B - Page 26

1-11
1.4 Specifications
Table 1-6 Standard Specifications (Continued)
fc: Signal frequency
fs: Spurious signal
| fc-fs | ≤ 500 MHz
Signal level < -2 dBm
Signal level ≥ -2 dBm
| fc-fs | > 500 MHz
Signal level < -2 dBm
Signal level ≥ -2 dBm
12 digits plus one digit for minus sign
248 × 60 dot LCD with backlight
Settings are stored in nonvolatile memory during power outages
Starting characteristics : –5 × 10
—8
/day(after 30 minutes warm-up)
Aging rate : –2 × 10
—8
/day (after 24 hours warm-up)
Temperature characteristics : –5 × 10
—8
(25 °C –25 °C)
Frequency : 10 MHz
GPIB(conforms to IEEE 488.2 standard commands)
Interface function : SH1, AH1, T5, L4, SR1, RL1, PP0, DC1, DT1, C0, E2
100 to 240 V (auto-switching)
47.5 to 63 Hz
When started ≤ 90 VA, under normal operation ≤ 80 VA
0 to 50 °C
213 W × 88 H × 350 D
≤5 kg
MF2414B
16
17
17.1
17.2
18
19
20
21
22
23
24
Allowable spurious range
Display
Digits displayed
Display type
Backup
Reference crystal oscillator
stability
External control
Power supply
Temperature range
Dimensions
Mass
Item MF2412B MF2413B
Signal frequency
600 MHz ≤ fc ≤ 40 GHz
Spurious signal
≤ -27 dBc
Signal frequency
600 MHz ≤ fc ≤ 40 GHz
Spurious signal
≤ -35dBc
Signal frequency
600 MHz ≤ fc ≤ 20 GHz
20 GHz < fc
≤ 27 GHz
27 GHz <
fc ≤ 40 GHz
Spurious signal
≤ -27 dBc
≤ -32 dBc
≤ -{0.741 × fc (GHz) +12} dBc
Signal frequency
600 MHz ≤ fc ≤ 20 GHz
20 GHz < fc
≤ 27 GHz
27 GHz <
fc ≤ 40 GHz
Spurious signal
≤ -35 dBc
≤ -40 dBc
≤ -{0.741 × fc (GHz) +20} dBc