User Manual
13
Fingerprint registration:
Press [<] or [>] key to select 1 or 2, 1 is to register the 1st FP, 2 is for 2nd FP.
Press [OK] to continue.
Place the finger on sensor scanner. Please follow the screen prompts to register the
fingerprint.
Remove finger, the system will prompt.
Place the same finger on sensor scanner again. After scanning successfully, the system
will prompt as follow:
Press [OK] to save fingerprint. Press [C] back to user registration interface.
The 2nd finger registration as the same steps as above.
Password registration:
Press [<] or [>] key to [Password] option. Press [OK] to continue.
Please Input 1-6 digits as password. Press [OK] to confirm and input same password
again. The system will prompt:
Press [OK] to save interface.
To Next Page
Loading...
Need help?
General
