User Manual
29
User: Registered user number in device.
FP: registered fingerprints number. Select it and press [OK] key and you can check the
password and card number.
Log:The number of the attendance record stored in the device.
Serial: The unique identifier of the device and cannot be modified.
FirmVer: the firmware version of program which write in EROM or EPROM (Programmable
read only memory). So called firmware is firm program saved in integrated circuit firmly,
responsible for controlling and dealing with integrated circuit.
After checking completed, click [C] to exit.
3.6 Shut Down
In time attendance status, keep pressing [OK] key until interface shows as following.
Then device will shut down.
Notice: If external power is connected, you can press [OK] key to power on device.
To Next Page
Loading...
Need help?
General
