Anviz P7 - 3.4 Setup

User Manual
18
3.4 Setup
[Setup] menu mainly includes [System], [Log Setup] and [Hardware Test].
Enter management menu, press [<] or [>] key to select [Setup] option.
Press [OK] key to enter [Setup] sub-menu. Press [<] or [>] key to shift menu.
3.4.1 System Setup
3.4.1.1 Device ID
In [Setup] menu, press [<] or [>] key to enter [System] setup option.
Press [OK] key to enter system setting sub-menu.
Note: Device ID range is 0-99999999, and default is 1.(Device ID must enter as same as in the
communication software), When the device as ―0‖, must use the lasted 8 digit of the serial
number to communication with software.
3.4.1.2 Time
In [Setup] menu, press [<] or [>] key to enter [System] setup option.
Press [OK] key to enter time setting interface.
You can press the [OK] key to move the cursor to shift the year, month, day. And use number
and [<] or [>] key adjust the time. After setting completed, press [C] key and enter system time
save interface.