Anviz P7 - Page 22

User Manual
21
Press [OK] key to enter net parameter interface.
Mode:
There are two modes for networking.
Press [<] or [>] key to select [Server] or [Client].
Server: Normal net mode;
Client: Only communication with the PC which has server IP.
IP Address
Press [<] or [>] key to select [IP address] option:
Press [OK] key to enter IP address setting interface:
Press [<] or [>] key or number key to input IP address. Press [OK] key to shift between the 4
segments. After set is completed, press [C] key to enter IP address save
interface.
Press [OK] key to save the modification. Press [C] key to cancel.
Subnet Mask
Press [<] or [>] key to select [Subnet mask] option.
Press [OK] key to enter subnet mask setting interface.