ARAG Skipper LT - Boom Sections

17
6.5.1 - Boom sections
Fig. 30
Overall width (Fig. 32)
Fig. 31
Indicate the width of every boom section.
Repeat programming for each item shown in Fig. 30 and disable the sections not connected.
Message
Disabled will appear on the display.
Accordingtosetprogramming,thedisplayedbarappearancewillchange(par.7.3).
Fig. 32
Section
1
Section
2
Overall width
PROGRAMMING - MACHINES SETUP
Par.
6.3
Scrolling menu items.
Increase / decrease data
Quit the function or
data changes
Conrm access or
data changes.
Shift the
cursor
Reset / disable
data