ARAG Skipper LT - F2 Day; Night

44
8.3.2
F2Day/
Night
Toggle from day display guidance mode to night one and vice versa (Figures 130 - 131)
Default display mode is Day. Following are the two possible instances:
DAY DISPLAY MODE NIGHT DISPLAY MODE
1A Night display mode is active.
Press
F2 to shift to Day mode (Fig. 130).
Fig. 130
1B Day display mode is active.
Press
F2 to shift to Night mode (Fig. 131).
Fig. 131
WORK FUNCTIONS - PAGE 3
END OF PAR. 8.3 - FUNCTIONS LIST - PAGE 3