ARAG Skipper LT - Page 9

9
Antenna fastening:
The antenna has a magnetic base and should be positioned on a at metal surface (e.g. farm machine roof). In case of plastic roof, use the supplied
metal plate and sticker.
Remove one of the protective lms from the sticker and stick it onto the metal plate. Then remove the other protective lm and position the plate where
the antenna is being tted after cleaning the whole area.
Itisimportantthatthemetalplateandtheantennaarepositionedontoaatsurfacefreefromanyobjectswhichmightreduce
adhesiveadherence.
Fig. 9
Checkforpropermetalplatexingatregularintervalssotoavoiditsaccidentaldetachment.
INSTALLATION