Array electronic SH-300 User Manual

SH-300 User’s Manual
Appendix
Page 103 of 103
Appendix : Note item
 All basic default function keys except ALM, SET, ESC, ENT, UP, DOWN key can be
redefined . If the default function conflict with the defined function, the basic function will
be out of action.
 Setting register, press CLR key to enter desired digits. When only a single digit need to
Change, move the cursor to the digit with the direction key and then input the number
your need directly. If you want to input A-F in the Hex system, input 0 or 9 and press
up/down key .
 If the actual digits of the register exceeds the maximum digits of the setting value the last
digit entered is overwritten. So user must set the likely Max. value by the register type
when programming.
 When jumping window of screen protection, pressing any key will be invalid and only
returned to the original window.
 If the lower limit value of register, bar graph and trend line exceeds its upper limit value
the program won’t be downloaded and you will receive an incorrect report. Please check
it before downloading the program
 When set a new value of register use CLR key to delete the current set value and press
the digital key to improve input speed.
 Under the precondition of reliable communication we should make the most of a higher
baud rate. Higher baud rate can greatly improve the window refresh rate and decrease
the response time for controlling button.

Array electronic SH-300 Specifications

General

Brand	Array electronic
Model	SH-300
Category	Controller
Language	English