Array electronic SH-300 - 4.4 Delta DVP Series

SH-300 Text Panel
Page 68 of 103
4.4 Delta DVP Series
SH-300 can communicate with the delta DVP series PLC, the communication port is the
programming port of PLC
SH-300 software configuration:
Item
Content
SH-300 COM port
9 pin COM port
PLC COM port
Programming port
Default parameter
9600bps、7bits、1stop、Even
Station No.
1-254 ,1 is Windows default
Distance (Max.)
15m
Communication mode
RS232
Cable type
Special cable
Inner relay address
M0-M1270
Register address
D0-D1066
Connection guidance of Special cable:
SH-300 side
2 RXD
5 TXD
PLC side
9 pin D shape
3 TXD
4 RXD
9 pin D shape
Female plug
5 GND
8 GND
Male plug
( when SH-300 communicates with Delta DVP series PLC you are recommended to use the the
programming cable )