Array electronic SH-300 - 2.4.6 Connection Settings; 2.4.7 Tool Functions

SH-300 Text Panel
Page 24 of 103
Progress Bar
Bar graph, which can be used to monitor data change in PLC
Trend Line
Trend graph, which can be used to monitor data change in PLC
Picture
Insert the monochrome graphics file (Max. 192×64 pixels )
Message
Display
Displays the status of PLC inner relay user-definedly.
2.4.6 Connect
The instruction is mainly used to Set PLC type, Set Communication Port and Download Data.
▲ Set PLC type: setting the linked PLC type and parameter
▲Comm Setting: selecting the communication port
▲ Download: download the project data file into SH-300
2.4.7 Tool
The instruction is mainly used for password protection and user-defined information including
protect file password and immanent resource
▲ Protect File Password: Set the SH300 project file to be password protected.