Array electronic SH-300 - 2.4.1 File Management

SH-300 Text Panel
Page 20 of 103
2.4.1 File
This instruction is mainly used for project file management, including creating, opening, saving etc
Menu Name
Function
New project
Create a new project file
Open project
Open an old project file
Save project
Save the current project file
Save as
Save the current file to a new path
Close project
Close the current project file
Exit
Exit SH300 software
2.4.2 Edit
This instruction is mainly used for tool management, including cut, copy, paste, delete, select all,
control, position and so on. The pulldown menu is shown as the following: