Array electronic SH-300 User Manual

SH-300 Text Panel
Page 98 of 103
FAB program is shown above. If there is a need to set and display the value of the function
block B1 through SH-300, the operation is shown as following graph:
Explanation: As the SH-300 can not identify second, minute and hour when it is displaying
and setting the time of function block, the static text can be used firstly to input the
unit that needs to be displayed (e.g. s m h). When SH-300 is setting the time
parameter, the fixed format is used: digits: 4, decimal digits: 2, in order to keep the
same format as it displayed in FAB program. And when it is setting the analog parameter,
the fixed format is used: digits: 3, decimal digits: 1.

Array electronic SH-300 Specifications

General

Brand	Array electronic
Model	SH-300
Category	Controller
Language	English