Syncing the Settings of Two Cameras 117
MENU>Monitoring>EVF>Surround mask
MENU>Monitoring>EVF>Framelines
MENU>Monitoring>EVF>Anamorphic desqueeze*
MENU>Monitoring>MON OUT>Frame rate
MENU>Monitoring>MON OUT>Scan format
MENU>Monitoring>MON OUT>Status info
MENU>Monitoring>MON OUT>Surround view
MENU>Monitoring>MON OUT>Surround mask
MENU>Monitoring>MON OUT>Framelines
MENU>Monitoring>MON OUT>Anamorphic desqueeze*
MENU>Project>Project fps
In addition, the slave camera takes over the Camera ID of the master
camera, so file names are identical except for the Camera ID prefix. It is
important to give the master and the slave camera different Camera ID
prefixes to prevent duplicate file names.
*Note: Valid license for anamorphic desqueeze must be installed on both cameras.
To Next Page
Loading...
