Main Controls 85
Status info At the upper and lower edge of the EVF, right outside
the active image area, additional status info can be
displayed. The upper area contains camera image
parameters, the lower area contains camera status
infos.
Electronic level Overlay showing the horizontal levelling of the
camera.
Only available on ALEXA Plus.
LDS info Overlay showing LDS lens info.
Only available on ALEXA Plus.
MON OUT
The MON OUT is a 422 1.5G single link HD-SDI output. The output range is
fixed to legal range.
Frame rate The MON OUT frame rate can be set to 23.976, 24,
25, 29.97 or 30 fps. The frame rate should, if
possible, match the sensor frame rate to avoid frame
drops or duplicate frames on the output, which would
result in jittering images when image content is
moving.
Scan format Defines how images are transmitted.
p: Progessive. Images are transmitted line by line
from left to right, starting at the top-left pixel.
psf: Progressive segmented. Images are first split
into fields, which are then transmitted line by line
from left to right.
Surround view The ALEV III sensor has 10% additional pixels
outside the recorded image for a better monitoring
experience. The user can decide whether he wants to
see these 10% in the MON OUT or not. By switching
surround view on, objects that are not wanted in the
image, such as microphone booms, can be seen by
the operator before they enter the image.
Frame lines +
status info
Links to a screen where frame lines, surround mask,
center mark and status info overlays can be switched
on or off in the MON OUT.
Peaking Opens a screen where peaking in the MON OUT can
be switched on or off, and the strength of peaking can
be set.
False color Activates the false color display on the MON OUT.
The false color display is a visual exposure help that
uses color coding to emphasize significant luminance
values.
To Next Page
Loading...
