ASCOM UPAC Series User Manual

TD 92483GB
2008-06-05/ Ver. B
Installation and Operation Manual
UPAC- Unite Packet for Messaging and Alarm
70
When the edited or new html file is saved as index.html and placed in the Start page
folder on the UPAC FTP area, it will replace the default start page.
Figure 37. NetPage default user interface (index4).
The default NetPage user interface index.html, see figure 90 above, is opened from the
start page by clicking “Send Message”.
In the NetPage folder on the UPAC FTP area there are four examples of the Netpage user
interface, index1, index2, index3 and index4. Index4 is a copy of the default NetPage user
interface.
All NetPage functionality is included in the default user interface, but all parameters that
can be configured in the example user interfaces index1, index2 and index3, are not
shown. The necessary code for viewing and configuring the hidden parameters is
included, but they are marked as comments to prevent the browser from interpreting
them, see figure 39 and figure 40 on page 72.
Figure 95.
Figure 96.

ASCOM UPAC Series Specifications

General

Brand	ASCOM
Model	UPAC Series
Category	Conference System
Language	English