Aspen Avionics EFD1000 - Main Menu

EFD1000 Installation Manual
DOCUMENT # A-01-126-00 PAGE 192-225 Revision H
© Copyright 2009 Aspen Avionics Inc.
7. Monitor the CDI localizer deflection and verify that upon intercepting the localizer
that the autopilot switches to Approach NAV Capture, turns to track the localizer
course, and arms the glide slope.
8. Monitor the autopilot localizer tracking performance. Upon intercepting the glide
slope verify that the autopilot switches from glide slope ARM to glide slope capture,
and initiates a descent to track the glide slope.
12.12 Main Menu
12.12.1 Menu Controls
The EFD1000 Main Menu is used to adjust various system configuration settings and
preferences. To select the Main Menu, press the MENU button on the right side of the
display bezel. To exit the Menu, press the MENU button again.
Main Menu Navigation
Once the Main Menu is activated, rotating the lower right control knob will select the
various menu pages. The current menu page is indicated by the page name and legend
“page # of #”, and by the location of the green segment within the segmented menu
navigation bar displayed at the bottom of the display.
Pa
g
e Location Le
g
end
Menu Pa
g
e Name
Se
g
mented Menu Bar
Figure 12.35 – Main Menu Navigation
Configuring Menu Items
Each menu page shows a series of menu selections adjacent to the right bezel line select
keys. Editable menu selections are indicated by white text, while status only or non-
editable items are shown in green. Items that have been inhibited from editing are
shown in gray.
Pressing a line select key adjacent to an editable field enables the item for editing,
indicated by showing the editable value in magenta. Rotating the lower right control
knob adjusts the editable value. Changes are effective immediately.