Need help?Do you have a question about the Aspen Avionics Evolution EFD1000 PFD and is the answer not in the manual?
General| Brand | Aspen Avionics |
|---|---|
| Model | Evolution EFD1000 PFD |
| Category | GPS |
| Language | English |
Details the functions controlled by the Right Knob (HDG, ALT, BARO, MIN).
Details the functions controlled by the Left Knob (CRS, IAS).
Explains how to synchronize settings with current values using the control knobs.
Explains how to select the CDI navigation source and available options.
Details how to select navigation sources for bearing pointers.
Details the components of the Attitude Display, including ADI, tapes, and indicators.
Explains the ADI features like horizon line, pitch/roll scales, and slip/skid.
Describes the airspeed tape, bug, speed bands, and V-speed markers.
Details the altitude tape, bug, and alerter functions for altitude management.
Explains LDI, VDI, and Decision Height annunciations for instrument approaches.
Describes the Data Bar's display of TAS, GS, OAT, wind, and barometric pressure.
Outlines the information shown on the Navigation Display, including HSI and CDI.
Explains the HSI, its compass modes (360° vs. ARC), and ownship position.
Details the CDI's function in 360° and ARC modes.
Describes the VSI tape and numerical display for vertical speed.
Explains the use of bearing pointers for navigation information.
Guides on setting the target altitude for the Altitude Alerter.
Details setting the target airspeed using the Left Knob.
Details setting up for and executing an ILS approach.
Describes the aircraft reference symbol, horizon line, and scales on the ADI.
Details the airspeed tape, bug, speed bands, and V-speeds.
Explains how to set the selected airspeed bug and its display.
Details the altimeter components: bug, numerical value, tape, MINIMUMS, DH alert.
Explains how to adjust barometric pressure and set units (inHg/mB).
Details setting the selected altitude and altitude bug.
Explains altitude level-off alerts and deviation indicators.
Describes the MINIMUMS display and alert for instrument approaches.
Explains how to select the CDI navigation source and possible configurations.
Explains the AUTOCRS feature for automatic course setting with GPS.
Explains the pilot-selectable heading bug and its display.
Discusses connecting the EFD1000 with various autopilot systems.
Explains GPS Steering and its advantages over traditional navigation.
Describes the single-cue Flight Director display and how to follow it.
Provides examples of autopilot operations with the EFD1000.
Details V-speeds used for aircraft operating speeds and their definitions.
Describes the procedure for resetting the AHRS in flight due to attitude degradation.
Explains the effects of pitot/static blockage and required actions.
Details the system's behavior and indications during loss of external power.
Provides procedures for manually powering off and on the EFD1000.
To Next Page
