CHAPTER 6, EMERGENCY AND ABNORMAL PROCEDURES
EFD1000 PFD Pilot’s Guide
Page 6-6 A-01-184-00 REV B
EFD1000 PFD Pilot’s Guide
EFD1000 PFD Pilot’s Guide
6.5. Abnormal Shutdown Procedure
The EFD1000 PFD is typically powered through an EFIS Power Control switch that is
connected to the aircraft Battery bus. The system will power up, based on the position
of the EFIS Power Control switch or switch that controls power to the Battery bus.
Typically, when on the ground, powering up/down the aircraft simultaneously powers
on/o the EFD1000 PFD. If the EFD1000 PFD has been powered o and aircraft power
is available to the EFD1000 PFD, pressing the REV button momentarily will turn on the
EFD1000 PFD.
Power O Manually
1. Pull the circuit breaker.
2. Press and hold the REV key until the EFD1000 PFD powers on.
Or
1. Press the MENU key. The Menu displays.
2. Rotate the Right Knob to display Page 6 of 7, POWER SETTINGS.
3. Press Menu Key 3, SHUT DOWN. The power down sequence initiates.
Power On Manually
Press and hold the REV key until the EFD1000 PFD powers on.•