Aspen Avionics Evolution EFD1000 PFD - Quick Controls Overview; Control Knobs (See 2.2.1 for Detail)

EFD1000 PFD Pilot’s Guide
CHAPTER 3, FLYING THE EFD1000 PRO PFD
EFD1000 PFD Pilot’s Guide
EFD1000 PFD Pilot’s Guide Page 3-3A-01-184-00 REV B
3.1. Quick Controls Overview
Chapter 2 explains the EFD1000 controls in detail. The following is a quick summary:
Control Knobs (see 2.2.1 for detail)
The Left and Right control knobs each has a Home state, to which it returns •
after 10 seconds of inactivity. The left knob is the CRS knob, and the right
knob is the HDG knob.
The current function of each knob is shown by a legend on the screen •
immediately above the knob. If the legend is shown in magenta, turning the
knob will change the value of the function shown. If the legend is shown in
cyan or green, turning the knob will have no eect.
From the Home state, pressing the knob once will enable the current function •
to be set (legend color changes from cyan to magenta). Successive presses
of the knob will cycle through the functions that knob can control. When
the function you want to change is shown in magenta, turning the knob will
change the value.
The Left control knob sets the Course Pointer (CRS, except when Auto Course •
Select is enabled) and Indicated Airspeed Bug (IAS).
The Right control knob sets Heading (HDG), Selected Altitude (ALT), •
Barometric Pressure Setting (BARO), and Approach Minimums (MIN).
Pressing and holding a knob syncs the function shown to the current value.•