How to Use - Fine Adjustment of the Incubator
27
1-20 Version Indication
This allows display of the firmware version.
Press and hold SILENCE for 1 second or longer to display temperature fine-adjustment
mode indication .
When in this display, press UP five times or DOWN once to display version indication
on the temperature indication section and display the current version number on the CO
2
indication section.
To return to the previous layer of the setting item, press SILENCE.
Example of version indication (Numeric value: Shown for reference)
1-21 Initialization Mode
When the power is Off, turn On the power while pressing and holding UP and DOWN at
the same time, to enter the initialization mode and restore the initial setting values. Do not
perform initialization unless a problem such as production malfunction occurs.
To Next Page
Loading...
